Every Service. One Shop. Total Accountability.
United Systems Associates designs, installs, programs, and services every system we touch — building automation, access control, video surveillance, lighting, and more. The same team that engineers your system runs the wire and commissions it. That means one point of contact, one standard of quality, and no finger-pointing when something needs attention.
Below is the full scope of what we deliver. Whether you need a new automation system, a retrofit off a dead-end platform, or an ongoing maintenance partner, it all comes from the same shop.
Building Automation & HVAC Controls
We design, program, and install Delta Controls building automation systems that manage heating, cooling, and ventilation across your entire facility — on open BACnet architecture you own and can service with any qualified provider.
- Zone control and VAV systems
- Air handler sequencing and scheduling
- Chiller plant sequencing and staging
- Rooftop unit control and scheduling
- Custom controller-level programming — if you can describe the behavior, we can build it
Because we self-perform the installation, the engineer who programmed your system is the same team that wired the panels. No translation layer, no scope gaps.
System Retrofits & Upgrades
Legacy controls platforms eventually reach end-of-life — no firmware updates, no parts, and no competition for service. That leaves you locked to a single vendor who knows you have no choice. We migrate aging and proprietary systems onto open BACnet, so you own your building controls again.
- Migration off proprietary and dead-end platforms
- Reuse of existing field devices where viable — reducing demo cost
- Open BACnet controllers and programming replacing legacy logic
- Commissioning and verification to confirm performance matches design intent
- Documentation delivered so the system is serviceable by any qualified party
The result: a building controls system that's yours — not tied to any single vendor, serviceable in the open market, and built to run for the next twenty years.
Niagara Framework Integration
Many large or multi-tenant facilities end up with building systems from different manufacturers that don't speak to each other. Tridium Niagara is the industry's leading open supervisor platform for solving exactly that problem. We deploy Niagara supervisors and JACE controllers to pull BACnet, Modbus, LonWorks, and other protocol devices onto a single head-end — one interface for your entire building portfolio.
- Multi-vendor sites with mixed BAS, access, and mechanical systems
- Campus or multi-building facilities needing a unified dashboard
- Integration of third-party equipment and subsystems that don't share a native protocol
- Enterprise reporting and alarming across all systems from one platform
Because Niagara is open and vendor-neutral, your investment is portable. You're not dependent on us or any other single integrator to maintain access to your data.
Access Control
We install and program door access and credential management systems that integrate directly with your building automation platform. Because we program at the controller level, access rules aren't limited to factory presets — they're built around how your facility actually operates.
Buildings that won't do what you need. Off-the-shelf systems limit you to their built-in presets. We program at the controller level, so if you can describe the behavior you want, we can build it. This shows up most in access control: doors scheduled around shifts, access tied to occupancy or events, different rules by door or time. If you can think it up, we can program it.
- Door access hardware and electric locking devices
- Credential management — cards, fobs, PINs, mobile credentials
- Shift-based and time-of-day scheduling per door
- Occupancy- and event-driven access rules
- Integration with HVAC, lighting, and alarm systems
- Audit trail reporting
Video Surveillance (CCTV)
We design and install IP camera systems with network video recording and remote viewing capabilities — and integrate them with your access control and building automation platform. That means a camera at a door can be tied to an access event, and your security systems work as a coordinated whole rather than isolated islands.
- IP camera selection, placement, and installation
- Network video recorder (NVR) configuration and storage sizing
- Secure remote viewing from any authorized device
- Integration with access control for event-correlated video
- Scalable design — cameras can be added as your needs grow
Because we self-perform the installation and handle the systems integration, camera placement is coordinated with access points and building systems from day one — not bolted on after the fact.
Lighting Control
Automated and scheduled lighting tied into your building automation system reduces energy waste and keeps your facility operating consistently — lights on when spaces are occupied, off when they're not, without relying on anyone remembering to hit a switch.
- Scheduled lighting by zone, floor, or space type
- Occupancy-based control integrated with BAS occupancy logic
- Daylight harvesting integration where applicable
- Coordination with HVAC scheduling — occupancy modes align across systems
- Override capability for after-hours staff or events
Tying lighting into the BAS rather than running it as a standalone system means fewer interfaces to manage, a single audit trail, and the ability to make schedule changes in one place that propagate across all affected systems.
Remote Monitoring, Support & Software Hosting
Flying blind is one of the most common problems in facilities management — no visibility into what the building is doing until something breaks or a tenant calls. We solve that two ways: remote monitoring that watches your systems offsite, and hosted software that gives you secure web access to your building from any device, without running servers on site.
Remote Monitoring & Support
Our team can access your building systems offsite to troubleshoot, make adjustments, and respond to alarms — often before you're aware of a problem. Faster response, less downtime, and a partner who sees your building the way you want to see it.
Software Hosting — enteliWEB & Niagara
We host your enteliWEB or Niagara supervisor platform on secure infrastructure, so you get a web-based dashboard into your building systems without the overhead of managing on-premise servers. Access from any browser, user-level permissions, and offsite redundancy built in.
For existing customers, your support portal is available at support.usacontrols.us — log in to submit service requests, review system history, and track open items.
Preventive Maintenance & Ongoing Service
A controls system isn't a one-time project — it runs your building for decades. Preventive maintenance agreements are how we stay engaged after the install is done: scheduled checkups that catch drift before it becomes a complaint, firmware and software kept current, and a service team that already knows your system when you call.
- Scheduled preventive maintenance visits — frequency by agreement
- System health checks: setpoints, schedules, alarm thresholds
- Firmware and software updates
- On-call service response for issues between scheduled visits
- Priority scheduling for agreement customers
- Documentation and service history maintained on file
A partner for the life of the building, not just the install. A controls system isn't a one-time project, it runs your building for decades. We approach every job that way. When issues come up, we stay engaged and see them through, and we're here long after the install is done to keep your building running right. Our goal is a relationship that lasts the life of the building, not a transaction that ends when the job closes.
